Leveraged and Inverse ETF Charts: Daily Reset and Decay
Leveraged and inverse ETFs reset daily to track a multiple of one day's return. Why their charts drift from a simple multiple of the index within days.
📚 Reading US Stock Charts · 16/22·⏱ About 5min read·Information updated 2026-10-10
📋 Key facts5
Target
Most aim to track a set multiple (2x, -1x and so on) of the index's daily return
Daily rebalancing
They adjust their exposure every day to keep the target multiple
Volatility decay
Even if the index ends where it started, a choppy path can leave a leveraged product down
Comparing charts
The return over a period is not a multiple of the index return; compare both started at 100 on the same day
Note
Educational material on reading charts, not investment advice
What leveraged and inverse ETFs are
A leveraged ETF is designed to deliver two or three times the percentage move of its underlying index in a day, and an inverse ETF is designed to move in the opposite direction. In Korea many are built on the KOSPI 200, and in the US on the S&P 500 or Nasdaq-100. The name suggests that if the index rises 5% in a month, a 2x product should rise 10%, but what most of these products promise is a multiple of the daily return. That one word, daily, is what makes the charts drift further apart the longer you look.
What daily rebalancing does
For a 2x product to deliver exactly twice the index every day, it has to readjust its exposure at each close to match its new asset value. This is called daily rebalancing, and it has a few traits.
After an up day it increases exposure, and after a down day it reduces exposure
That makes it a trend-following structure that buys more after gains and holds less after losses
The multiple holds well for a single day, but strung over many days, compounding pulls it out of line
Inverse products also reset their opposite exposure daily, so they face the same problem
Volatility decay with made-up numbers
This is a hypothetical example to explain the idea, not a real product, and it assumes no costs or tracking error. Say an index starts at 100, rises 10% on day one and falls 10% on day two.
Index: 100 to 110, then 99, a 1% loss over two days
2x product: 100 to 120, then 96, a 4% loss (more than 2%, twice the index loss)
-1x inverse product: 100 to 90, then 99, the same 1% loss as the index
So even when the index only swings around the same level, the multiplied product gets worn down
Optical illusions on the chart
Look at the chart without knowing this structure and a few illusions appear. The classic one is an index that has returned to its price of a few months ago while the 2x product sits well below its own price from that time. On the other hand, in a period of steady gains in one direction, the 2x product can seem to have risen more than twice the index. Neither is a calculation error; both come from daily rebalancing and compounding. An inverse product's chart is also not the index chart flipped upside down. Even in a falling trend, repeated days of sharp rebounds can keep an inverse product from rising as much as you would expect.
Trending markets versus sideways markets
Volatility decay shows most clearly in a sideways market that swings hard without direction. The bigger the daily swings, the longer the period and the higher the multiple, the more gets worn away. In a calm market that trends steadily one way, compounding works in your favour and the period return can even exceed the index multiple. You cannot know in advance which you will get, so do not picture a leveraged or inverse product's long-term chart as the index chart multiplied. What you need to read on the chart is not just the direction but how rough the ups and downs were over that period.
What to check when you open the chart
When you open a leveraged or inverse ETF chart, run through these points in order. The same chart becomes much less confusing.
Check the prospectus for whether the target is a multiple of the daily return and what the underlying index is
Overlay it with the underlying index, both started at 100 on the same day, to see the size of the drift
Look at whether the index moved in one direction over that period or swung widely
Check costs such as the expense ratio, and currency effects for foreign products, in the official product documents
Check it with this site's live tools
Put the underlying index, a plain ETF tracking it and a leveraged or inverse ETF into the stock comparison tool, and you can see their cumulative paths started at 100 on the same day side by side, along with volatility and maximum drawdown. Products not on the list can be added through manual entry. Change the period to see how the drift differs between trending and sideways stretches. It also helps to find a period when the underlying index fell sharply in the index drawdown and recovery tool and compare the same dates. Prices may be delayed.
Things to keep in mind
This guide explains how to read leveraged and inverse ETF charts; it is not investment advice and does not encourage trading any product. The numbers above are a made-up example to show the structure, not the performance of any real product. Multiplied products multiply losses too, and the longer you hold them, the further they can drift from the index. As of October 2026, individual investors in Korea trading leveraged products for the first time must complete the Korea Financial Investment Association's advance training and hold the basic deposit set by their broker (at least 10 million won for ordinary leveraged products). From 22 May 2026, the 10 million won basic deposit also applies when first trading leveraged ETFs and ETNs listed abroad, and from 31 July 2026 the basic deposit for single-stock leveraged products rose to 30 million won in cash. These requirements change often, so check trading conditions and costs with official guidance from the Financial Services Commission, your broker and the fund manager.